EasyCut™ Glass Bottle Cutter Kit

Turn Old Bottles And Jars Into Functional Pieces Of Artwork With EasyCut™!

Make your own drinking glasses, vases, ashtrays, aquariums, lamps and more - the possibilities are endless! The tool is so simple to use that anyone can have fun with it! Just take an old wine bottle, put it on the holder, apply pressure, and rotate. Give the bottle subsequent baths of cold and warm water and you got yourself a perfect cut bottle with a smooth edge! 

• ADJUSTABLE LENGTH and WIDTH - Adjustable hole design allows you to cut from both the top or the bottom of the glass bottles and mason jars. Suitable for all beer/wine/drinking glass bottles.
• CUTS YOUR OWN STYLE BOTTLES - Directionally adjustable blade for a variety of styles. The powerful blades provide a clean cut for smooth edges.
• STABILE AND DURABLE - Increased friction for more stability. Made of high-quality metal, lightweight but also handy and sturdy. Easy to keep and clean.
• EASY TO USE - Just place your bottle on the cutter, rotate the bottle while applying pressure, heat the score over boiled water and cold water alternately three times. 
• ECONOMICAL & ENVIRONMENTALLY FRIENDLY -  Recycle your glass bottles to reduce waste and create your own artwork!

HOW TO USE

1. Positioning Bottle - The bottle is placed lengthwise on the cutter with a bottom flush against the backstop and resting on the rollers. The position of the backstop and rear rollers determines the point at which you cut the bottle.

To adjust the length, loosen screw and slide backstop and rollers forward for a shorter cut and backward for a longer cut.

2. Etching the Glass - A light etch is all that is required. Apply only slight pressure on the bottle while rotating the bottle toward you with your hand. To ensure an accurate cut, keep the bottle firm against the backstop.

Do not allow the bottle to stop turning while scribing the etch. A slight crunching sound will signal the completion of the etch. One revolution of the bottle is all that is necessary.

3. Separating the Bottle - Soak the bottle in boiled water(must cover the scoreline), slowly rotate the bottle in one direction for one to two minutes.

Then soak it in cold water quickly, also rotating it for one to two minutes. You may hear audible “clicks” indicating that the etch is cracking. You can then separate the bottle.

Sometimes, it’s necessary to repeat the boiled and cold water soaking steps several times depending on the thickness of the glass.

4. Smoothing the Edge - To prevent chipping, rub the inside and outside edges lightly with the polishing paper. After a short time, the edge of the glass will become perfectly flat and have a dull gray appearance.

• Color: Transparent
• Cutting Length: 20mm-320mm
• Cutting Diameter: 20mm-230mm
• Cutter Size: 20cm x 15cm x 7.3cm

• 1 x EasyCut™ Glass Bottle Cutter Kit